ISO/IEC 25001-2007 软件工程.软件产品质量要求和评价(SQuaRE).计划和管理

作者:标准资料网 时间:2024-05-20 20:56:44   浏览:9146   来源:标准资料网
下载地址: 点击此处下载
【英文标准名称】:Softwareengineering-SoftwareproductQualityRequirementsandEvaluation(SQuaRE)-Planningandmanagement
【原文标准名称】:软件工程.软件产品质量要求和评价(SQuaRE).计划和管理
【标准号】:ISO/IEC25001-2007
【标准状态】:现行
【国别】:国际
【发布日期】:2007-02
【实施或试行日期】:
【发布单位】:国际标准化组织(IX-ISO)
【起草单位】:ISO/IECJTC1/SC7
【标准类型】:()
【标准水平】:()
【中文主题词】:交流技能;计算机程序;数据处理;定义;企业;评定;信息技术;管理;组织;计划;产品开发;产品规范;程序开发;质量保证;质量管理;质量要求;软件;软件技术;规范(验收);系统开发
【英文主题词】:Communicationskills;Computerprograms;Dataprocessing;Definitions;Enterprises;Evaluations;Informationtechnology;Management;Organization;Planning;Productdevelopment;Productspecification;Programdevelopment;Qualityassurance;Qualitymanagement;Qualityrequirements;Software;Softwaretechniques;Specification(approval);Systemdevelopment
【摘要】:ThisInternationalStandardprovidesrequirementsandrecommendationsforanorganizationresponsibleforimplementingandmanagingthesoftwareproductqualityrequirementsspecificationandsoftwarequalityevaluationactivitiesthroughtheprovisionoftechnology,tools,experiencesandmanagementskills.Theroleoftheevaluationgroupincludesmotivatingpeopleandtrainingthemfortherequirementsspecificationactivitiesandtheevaluationactivities,preparingappropriatedocuments,identificationordevelopmentofrequiredmethods,andrespondingtoqueriesonrelevanttechnologies.Technologymanagementisrelatedtotheplanningandmanagementofasoftwarequalityrequirementsspecificationandevaluationprocess,measuresandtools.Thisincludesthemanagementofdevelopment,acquisition,standardization,control,transferandfeedbackofrequirementsspecificationandevaluationtechnologyexperienceswithintheorganisation.TheintendedusersofISO/IEC25001arethoseresponsiblefor:-managingtechnologiesusedforrequirementsspecificationandevaluationexecution,-specifyingsoftwareproductqualityrequirements,-supportingsoftwareproductqualityevaluation,-managingsoftwaredevelopmentorganisations,aswellasthoseinaqualityassurancefunction.Itisalsoapplicabletomanagersinvolvedinothersoftwarerelatedactivities.
【中国标准分类号】:L77
【国际标准分类号】:35_080
【页数】:22P.;A4
【正文语种】:英语


下载地址: 点击此处下载
基本信息
标准名称:滚柱式拉刀夹头 圆拉刀用
中标分类: 机械 >> 金属切削机床 >> 机床辅具与附件
发布日期:1978-05-24
实施日期:1978-08-01
首发日期:
作废日期:
出版日期:
页数:5页
适用范围

没有内容

前言

没有内容

目录

没有内容

引用标准

没有内容

所属分类: 机械 金属切削机床 机床辅具与附件
基本信息
标准名称:非织造布梳理机
英文名称:Nonwoven card
中标分类: 纺织 >> 纺织机械与器具 >> 纺织机械与器具综合
ICS分类: 纺织和皮革技术 >> 纺织机械 >> 纺织机械综合
替代情况:被FZ/T 93060-2011代替
发布部门:中国纺织工业协会
发布日期:2003-09-04
实施日期:2004-01-01
首发日期:1900-01-01
作废日期:2012-07-01
提出单位:中国纺织工业协会
归口单位:全国纺织机械与附件标准化技术委员会
起草单位:上海纺织机械研究所、常熟飞龙机械有限公司、太仓市双凤非织造布设备厂
起草人:施尧训、陆忠宝、韩雪龙、范臻、汪之光、陆建国
出版社:中国标准出版社
出版日期:1900-01-01
页数:4页
适用范围

本标准规定了非织造布梳理机的产品分类、技术要求、试验方法、检验规则及标志、包装、运输和贮存等。
本标准适用于非织造布生产用的短纤维化纤梳理机.

前言

没有内容

目录

没有内容

引用标准

没有内容

所属分类: 纺织 纺织机械与器具 纺织机械与器具综合 纺织和皮革技术 纺织机械 纺织机械综合